Why Is It Easy To Nylon Cable Tie
Analysis of Nylon Cable Tie,
Nylon itself is relatively low temperature resistance, the cold weather in winter is also a normal phenomenon of fracture, if you want to solve this problem, you can add some low temperature comparison and compatibility with nylon raw materials. Or replace the low-temperature-resistant long-carbon chain nylon.
Nylon cable tie fracture analysis Second,
Do not think that the fine bag of particles is pure material, a lot of secondary granulation modified products, will inevitably undergo a number of high-temperature shear molding, the molecular structure of its own material has changed dramatically, the performance has been reduced by half, combined with the degradation , Oxidation and so on. Nylon Cable Tie to ensure its flexibility, usually nylon 3 - 8% during the water absorption, when the molecular structure of the destruction, and then how to cook, other means of absorption are useless, which determines its brittle, of course, easy to break ;
Analysis of Nylon Cable Tie
The relationship between the injection molding process is also very important, in order to shape the convenience of simple and good operation, by increasing the barrel temperature, to speed up the injection of plastic injection time, and so on, will also make the cable body quality problems, the details can be anatomical tape to observe, The inside is filled with dissatisfaction with the empty, and so on. Nylon raw materials themselves are a lot of categories, select the appropriate flexible system, such as single 6 and other use; injection molding process must be strictly limited to optimize; to avoid excessive processing of raw materials damage. Overall, it is from the raw materials and injection molding technology to start with detailed and targeted improvement.
to sum up,
Depends on the specific situation. If it is a small size of the Nylon Cable Tie, in the course of the use of too hard to reach the tension is easy to break; if not to reach the normal tension is easy to break that is the quality of the cable itself is a problem (some use of materials to do, Generally not); there is in the low temperature and relatively dry place to use, ordinary cable easily broken (because when the cable is more brittle, less water loss), then the time to purchase to the manufacturers Use the environment to choose a better tie